Paging file question

SpiritWarrior · 05-02-2004, 12:19 AM

I've heard some mixed views on this. What is the recommended amount to allot for paging on a system with currently 256mb ram? Some say, add the difference to get 1 gig in dual measurement. Others warn of PF usage in games actually slowing down your game if accessed on demand and almost discourage use of it at all (that'll make sense to anyone who knows about PF's). Watcha think?

Wysardry · 05-02-2004, 01:00 AM

The general rule of thumb usually given is: the page file should be twice the size of your physical RAM.

It is also much more efficient if it's a fixed size (rather than a range of values) and created on an empty or recently defragmented drive/partition (as the file will never become fragmented that way).

Sir Krustin · 05-02-2004, 10:29 AM

To add to what was said quite succinctly above, with the size of hard disks these days there's no reason not to set it quite large, say 2 gig or more even when you only have 256mb.

Another rule that's useful to know when you have two or more physical disks, is that the swapper is most efficiently placed on the most used partition on the least used hard disk

Bungleau · 05-02-2004, 11:50 PM

My general rule of thumb is to set it at one to two times the amount of memory. So in your case, between 256 and 512 MB. And I always, always, ALWAYS make it fixed. If you don't, Windows will burn cycles resizing it for you... and it will do that when you most need those cycles.

And I agree with Sir Krustin (at least partially). My swap file on my main PC is on drive D, not drive C. Most of my application stuff is on drive C, and separation is good. I find 2GB of virtual memory a little hard to swallow, though, but if you've got something that consumes that much memory, and your system can support it, set it up there...

Felix The Assassin · 05-03-2004, 12:19 AM

If you plan to use the other HDD, ensure it is not the slave to the main HDD. Nothing like bottlenecking your PGF on the same cable.

Operating System's are far more advanced now, yeah right! Stick to 1-2 x physical. I have 1 GB physical, and 2 GB virtual, on the opposite HDD of the main drive, spare is the master of IDE channel 2.

Games do in fact like to run amuck, stick to a fixed amount ie: 1gb min 1gb max. And don't have video BIOS turned to "Shadow" on, you should not have any issues.

05-02-2004, 12:19 AM	#1
SpiritWarrior Jack Burton Join Date: May 31, 2002 Location: Ireland Posts: 5,854	I've heard some mixed views on this. What is the recommended amount to allot for paging on a system with currently 256mb ram? Some say, add the difference to get 1 gig in dual measurement. Others warn of PF usage in games actually slowing down your game if accessed on demand and almost discourage use of it at all (that'll make sense to anyone who knows about PF's). Watcha think? __________________ Still I feel like a child when I look at the moon, maybe I grew up a little too soon...

05-02-2004, 10:29 AM	#3
Sir Krustin Symbol of Cyric Join Date: September 15, 2002 Location: Peterborough, ON, CANADA Age: 61 Posts: 1,394	To add to what was said quite succinctly above, with the size of hard disks these days there's no reason not to set it quite large, say 2 gig or more even when you only have 256mb. Another rule that's useful to know when you have two or more physical disks, is that the swapper is most efficiently placed on the most used partition on the least used hard disk __________________ If I say \"Eject!\" and you say \"Huh?\" - you\'ll be talking to yourself! - Maj. Bannister, <b>Steel Tiger</b>

05-02-2004, 11:50 PM	#4
Bungleau 40th Level Warrior Join Date: October 29, 2001 Location: Western Wilds of Michigan Posts: 11,752	My general rule of thumb is to set it at one to two times the amount of memory. So in your case, between 256 and 512 MB. And I always, always, ALWAYS make it fixed. If you don't, Windows will burn cycles resizing it for you... and it will do that when you most need those cycles. And I agree with Sir Krustin (at least partially). My swap file on my main PC is on drive D, not drive C. Most of my application stuff is on drive C, and separation is good. I find 2GB of virtual memory a little hard to swallow, though, but if you've got something that consumes that much memory, and your system can support it, set it up there... __________________ B Save Early, Save Often Save Before, Save After Two-Star General, Spelling Soldiers -+-+-+ Give 'em a hug one more time. It might be the last.

05-03-2004, 12:19 AM	#5
Felix The Assassin The Dreadnoks Join Date: September 27, 2001 Location: Orlando, FL Age: 62 Posts: 3,608	If you plan to use the other HDD, ensure it is not the slave to the main HDD. Nothing like bottlenecking your PGF on the same cable. Operating System's are far more advanced now, yeah right! Stick to 1-2 x physical. I have 1 GB physical, and 2 GB virtual, on the opposite HDD of the main drive, spare is the master of IDE channel 2. Games do in fact like to run amuck, stick to a fixed amount ie: 1gb min 1gb max. And don't have video BIOS turned to "Shadow" on, you should not have any issues. __________________ The Lizzie Palmer Tribute Let every nation know, whether it wishes us well or ill, that we shall pay any price, bear any burden, meet any hardship, support any friend, oppose any foe to assure the survival and the success of liberty. John F. Kennedy 35th President of The United States The Last Shot Honor The Fallen Jesus died for our sins, and American Soldiers died for our freedom. If you don't stand behind our Soldiers, please feel free to stand in front of them.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Paging Dr. Kevorkian...	Illumina Drathiran'ar	General Discussion	7	03-17-2007 03:46 AM
Technical Question About A .DLL File	Dundee Slaytern	General Conversation Archives (11/2000 - 01/2005)	3	01-29-2004 11:44 AM
Paging Father Bronze (& any who have graded papers at any level will like)	J.J.	General Conversation Archives (11/2000 - 01/2005)	12	12-21-2002 01:40 AM
save file question	Black Dragon6	Neverwinter Nights 1 & 2 Also SoU & HotU Forum	1	06-26-2002 09:17 AM
Swap file question	Verdant	Miscellaneous Games (RPG or not)	7	01-09-2002 12:37 AM

05-02-2004, 01:00 AM	#2
Wysardry Elite Waterdeep Guard Join Date: February 2, 2004 Location: UK Age: 58 Posts: 40	The general rule of thumb usually given is: the page file should be twice the size of your physical RAM. It is also much more efficient if it's a fixed size (rather than a range of values) and created on an empty or recently defragmented drive/partition (as the file will never become fragmented that way).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)