Image Ready 3.0 - [Question]

GokuZool · 09-29-2003, 02:29 AM

Is it possible to select all layers and edit them as one? I want to adjust the brightness for every frame, not just one. (i.e. all the frames have the same brightness) Anyone know how?

Thanks. [img]smile.gif[/img]

[ 09-29-2003, 02:32 AM: Message edited by: GokuZool ]

WOLFGIR · 09-29-2003, 04:40 AM

Yes you can by adding a correction layer.
In the layer palette you have a circle which if pressed down, will give you several options to add a new correction layer. Add a correction layer that changes they brightness/contrast for instance. It will change all the layers beneath it. If you have layers you don't want to be changed by this new layer, for instance a background. Add a new "set" a folder in the layer pallete, move the correction layer and the layers to be corrected into that folder called a set.

Voila.

GokuZool · 09-29-2003, 05:00 AM

Hey, thanks WOLFGIR. [img]smile.gif[/img] I haven't seen you online for ages.

WOLFGIR · 09-29-2003, 07:12 AM

No problemo.

Yeah well, been busy with trying to living and all that

GokuZool · 09-29-2003, 08:05 AM

One problem, isn't that button used to create masks? (see above pic)

Basically, I have 60 odd layers (small movie) but it's far too dark. Normally, I would just go to:

Image --> Adjust --> Brightness/Contrast

But that only does one layer/frame.

(Sorry about this. I'm alright with Photoshop 6, but with Image Ready, I have no idea. [img]tongue.gif[/img] )

[ 09-29-2003, 08:07 AM: Message edited by: GokuZool ]

WOLFGIR · 09-29-2003, 08:22 AM

My bad GokuZool!

First thing you do is svae your image, swap to Photoshop there you will find a new symbol, a circle with black and white filling. Then when you are satisfied with the change go back to Image Ready.

Now that correction will be marked as the mask effect in the layer.

(Also check the help how to use different modes of applying layer effects and correction layers! They are a marvel and a great help!)

09-29-2003, 04:40 AM	#2
WOLFGIR Bastet - Egyptian Cat Goddess Join Date: March 1, 2001 Location: Sweden Age: 50 Posts: 3,450	Yes you can by adding a correction layer. In the layer palette you have a circle which if pressed down, will give you several options to add a new correction layer. Add a correction layer that changes they brightness/contrast for instance. It will change all the layers beneath it. If you have layers you don't want to be changed by this new layer, for instance a background. Add a new "set" a folder in the layer pallete, move the correction layer and the layers to be corrected into that folder called a set. Voila. __________________ Don´t eat the yellow snow

09-29-2003, 07:12 AM	#4
WOLFGIR Bastet - Egyptian Cat Goddess Join Date: March 1, 2001 Location: Sweden Age: 50 Posts: 3,450	No problemo. Yeah well, been busy with trying to living and all that __________________ Don´t eat the yellow snow

09-29-2003, 08:22 AM	#6
WOLFGIR Bastet - Egyptian Cat Goddess Join Date: March 1, 2001 Location: Sweden Age: 50 Posts: 3,450	My bad GokuZool! First thing you do is svae your image, swap to Photoshop there you will find a new symbol, a circle with black and white filling. Then when you are satisfied with the change go back to Image Ready. Now that correction will be marked as the mask effect in the layer. (Also check the help how to use different modes of applying layer effects and correction layers! They are a marvel and a great help!) __________________ Don´t eat the yellow snow

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
General Question about Mirror Image Spell	Larry_OHF	General Discussion	11	02-03-2005 12:09 AM
project image question	gLadiatorWCR	Baldurs Gate II: Shadows of Amn & Throne of Bhaal	2	11-21-2004 03:43 AM
Image Resizing Question	Bahamut	General Conversation Archives (11/2000 - 01/2005)	6	07-12-2004 10:39 PM
An Image Question	Beaumanoir	General Conversation Archives (11/2000 - 01/2005)	3	09-22-2002 06:24 PM
A Question Of Image?	bjornm	Icewind Dale \| Heart of Winter \| Icewind Dale II Forum	1	11-07-2001 05:02 AM

09-29-2003, 02:29 AM	#1
GokuZool Lord Ao Join Date: September 11, 2001 Location: Sydney, Australia Posts: 2,061	Is it possible to select all layers and edit them as one? I want to adjust the brightness for every frame, not just one. (i.e. all the frames have the same brightness) Anyone know how? Thanks. [img]smile.gif[/img] [ 09-29-2003, 02:32 AM: Message edited by: GokuZool ]

09-29-2003, 05:00 AM	#3
GokuZool Lord Ao Join Date: September 11, 2001 Location: Sydney, Australia Posts: 2,061	Hey, thanks WOLFGIR. [img]smile.gif[/img] I haven't seen you online for ages.

09-29-2003, 08:05 AM	#5
GokuZool Lord Ao Join Date: September 11, 2001 Location: Sydney, Australia Posts: 2,061	One problem, isn't that button used to create masks? (see above pic) Basically, I have 60 odd layers (small movie) but it's far too dark. Normally, I would just go to: Image --> Adjust --> Brightness/Contrast But that only does one layer/frame. (Sorry about this. I'm alright with Photoshop 6, but with Image Ready, I have no idea. [img]tongue.gif[/img] ) [ 09-29-2003, 08:07 AM: Message edited by: GokuZool ]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)