02-25-2004, 07:43 AM | #1 |
Symbol of Cyric
Join Date: March 28, 2003
Location: Australia
Age: 37
Posts: 1,124
|
I've been wanting to post one of these for a while
AMD 2800+ 512 DDR 400 geforce 4 64 DDR 120 gig HDD Although i have the following problems: a) after long periods of using the mouse my keyboard cuts out b) windows bluescreens if i use IDE 3 or 4 to boot from c) sometimes my cpu gets up to 70 C |
02-25-2004, 08:16 AM | #2 |
Apophis
Join Date: July 29, 2003
Location: The Underdark cavern of Zagreb
Age: 37
Posts: 4,679
|
What cooler? What OS? What mouse and keyboard?
How much did you give for this?
__________________
MAKE LOVE, NOT SPAM! |
02-25-2004, 09:23 AM | #3 |
Apophis
Join Date: July 10, 2001
Location: By a big blue lake, Canada
Age: 50
Posts: 4,628
|
c) Get yourself a case fan or two to increase the air flow in your computer.
b) How many hard drives have you got? If more than one you don't have any primary partitions on your slaves correct? Sometimes that screws up booting when using Windows 2000 or Windows XP. a) Are you using ps2 or USB? If you are using SB you have installed the USB drivers for your motherboard right? Don't use the ones that come with Windows. The same goes for your IDE drivers.
__________________
Confuzzled by nature. |
02-25-2004, 10:36 AM | #4 |
Harper
Join Date: October 2, 2001
Location: Aberdeen, Scotland
Age: 42
Posts: 4,774
|
Is that with the cooler that came with your CPU? If so, remount it because that is way outside acceptable. You might want to lap it or at least put a better thermal compound on it. AS for which compound is better than the AMD stock thermal pad, all of them barring nanotherm, which has its own special problems. Arctic Silver 3 or 5 is very good.
__________________
[img]\"http://www.sighost.us/members/Zvijer/andrewas.gif\" alt=\" - \" /> |
02-25-2004, 11:27 AM | #5 | |
Quintesson
Join Date: September 12, 2001
Location: Ewing, NJ
Age: 42
Posts: 1,079
|
Quote:
|
|
02-25-2004, 09:00 PM | #6 |
Symbol of Cyric
Join Date: March 28, 2003
Location: Australia
Age: 37
Posts: 1,124
|
I'm using the HS fan that came with the processor, I agree it may be a problem with the thermal paste. I am using Win XP pro and a ps2 keyboard.
I have 2 HDDs but i would be happy to just get the system to boot from one, so i could use ide 1 and 2 for cdroms/zip etc (because you have to use ide 3 and 4 for harddrives only). If i try to install win xp to ide 3 or 4 it says that i don't have a harddrive. When windows setup starts do i press F6 or something to "install 3rd party raid drivers"? I built this myself |
02-25-2004, 09:44 PM | #7 |
40th Level Warrior
Join Date: October 29, 2001
Location: Western Wilds of Michigan
Posts: 11,752
|
Hmmm... sounds like you've got a motherboard with two IDE channels, on each of which you can hang two devices. And if I understand you correctly, you're saying that you can boot fine and install fine off of one channel, but if you try to install something on the other channel, it fails.
If that's correct, do you have a master device on that second channel? One of the two devices must be jumpered as the master, and the other as a slave. Check the back of the drives for the proper jumpering. In my experience (having built a few of my own machines), I haven't had any restriction on putting hard drives on one channel or the other. I now understand that you should keep similar devices on the same channel, because the channel moves at the speed of its slowest member. So put a hard drive and a CD-ROM on a channel, and they both pass data at the speed of the CD-ROM. You may have a different configuration, depending on your motherboard. Good luck.
__________________
*B* Save Early, Save Often Save Before, Save After Two-Star General, Spelling Soldiers -+-+-+ Give 'em a hug one more time. It might be the last. |
02-26-2004, 07:45 PM | #8 |
Symbol of Cyric
Join Date: March 28, 2003
Location: Australia
Age: 37
Posts: 1,124
|
No I have 4 IDE channels and i can connect 2 devices from each (which means i can connect 8 IDE devices), just IDE 3 and 4 are use for harddrives only and i uant to use IDE 1 and 2 for cd roms (3 cd drives and a zip drive).
But my problem is that windows (XP pro SP1) runs fine from IDE 1 or 2 but not from IDE 3 or 4 thus limiting the ammount of drives i can have to 4. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New computer | Sir Goulum | General Discussion | 24 | 02-20-2006 10:16 AM |
Computer question from the computer illiterate: | krunchyfrogg | General Discussion | 17 | 02-12-2005 07:45 AM |
Need a bit computer help.. | Kakero | General Conversation Archives (11/2000 - 01/2005) | 3 | 04-18-2004 10:15 PM |
Computer HELP! Please... | Gabriel | General Conversation Archives (11/2000 - 01/2005) | 15 | 07-20-2003 02:57 PM |
new computer | morningstar | Wizards & Warriors Forum | 2 | 01-22-2003 10:19 PM |