 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
 |
08-11-2003, 10:25 AM
|
#1 |
|
Elminster
 Join Date: July 15, 2002
Location: USA
Age: 37
Posts: 412
|
My friend and myself were wanting to have a LAN gaming session. I was wondering what kind of cable we should use and where it goes on the computers. thanx!
__________________
Capital Punishment turns the state into a murderer, Imprisonment turns the state into a gay dungeon-master. |
|
|
08-11-2003, 10:33 AM
|
#2 |
|
Fzoul Chembryl
 Join Date: February 19, 2002
Location: Your guess is as good as mine.
Age: 53
Posts: 1,728
|
Perhaps you should with LAN conguration first, then only worry about games.
These are some question regarding LAN: 1. How many PCs are there to be connected? 2. Operating system on each PC? 3. Does any of you know how to setup LAN? 4. Got beer? [img]graemlins/hehe.gif[/img]
__________________
(This is an invisible sig.) |
|
|
|
08-11-2003, 10:37 AM
|
#3 |
|
Dracolich
 Join Date: August 28, 2001
Location: Hurricane Valley
Age: 52
Posts: 3,089
|
you will need a cat5 cable and a router or hub to patch into if Im not mistaken.
Then you will need to do some settings with your IP's and what have you. |
|
|
|
08-11-2003, 10:39 AM
|
#4 |
|
Galvatron
 Join Date: January 22, 2002
Location: california wine country
Age: 61
Posts: 2,193
|
Each computer will need an ethernet card, many newer computers have on-board ethernet connectors. As for cabling it depends on what you want to do. If you are just going to directly connect the two machines then all you need is a cat-5 crossover cable. These are not the standard ethernet cables, they will specificly marked as crossover.
If you are going to do more then 2 computers you will need to get a hub (cheap ones are under $20), and one standard cat-5 ethernet cable for each machine. Plug one end of the cable into the machine and the other into the hub. This will allow you to network as many computers as you have ports on the hub. There is one last step, and that is setting up the network settings on each computer. Check your network settings and make sure TCP/IP is set on both computers and that each machine is set to obtain their ip address automaticly.
__________________
“This is an impressive crowd, the haves and the have mores. <br />Some people call you the elite. <br />I call you my base.”<br />~ George W. Bush (2000) |
|
|
|
08-12-2003, 07:38 AM
|
#5 | |
|
Baaz Draconian
 Join Date: November 5, 2002
Location: Denmark
Age: 58
Posts: 724
|
Quote:
[img]graemlins/greenbounce.gif[/img] Insane
__________________
Ko-founder of the SCFC(TM) Korporation. |
|
|
|
|
08-12-2003, 07:56 AM
|
#6 |
|
Harper
 Join Date: October 2, 2001
Location: Aberdeen, Scotland
Age: 43
Posts: 4,774
|
<pedancy>
The reserved IP addresses for LAN use are: 192.168.xxx.xxx 172.[16-31].xxx.xxx and 10.xxx.xxx.xxx </pedancy> The trouble is, if one of the computers on the LAN can see the internet, and one of the computers on the LAN has the same IP as a computer on the internet, troubles may occur for you. The given addresses are actualy owned by some company somewhere, they dont seem to be in use at the moment but they could be at some point.
__________________
[img]\"http://www.sighost.us/members/Zvijer/andrewas.gif\" alt=\" - \" /> |
|
|
|
08-12-2003, 09:47 AM
|
#7 | |
|
Galvatron
Join Date: January 22, 2002
Location: california wine country
Age: 61
Posts: 2,193
|
Quote:
[img]graemlins/greenbounce.gif[/img] Insane [/QUOTE]True and false. Using Automatic Private IP Addressing (APIPA) each machine will self-assign itself an IP in the range 169.254.0.0-169.254.255.255, with a subnet mask 255.255.0.0. Using fixed address is better, but more work to set up and I was too lazy to type out the instructions on how to do it [img]smile.gif[/img]
__________________
“This is an impressive crowd, the haves and the have mores. <br />Some people call you the elite. <br />I call you my base.”<br />~ George W. Bush (2000) |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
