Visit the Ironworks Gaming Website Email the Webmaster Graphics Library Rules and Regulations Help Support Ironworks Forum with a Donation to Keep us Online - We rely totally on Donations from members Donation goal Meter

Ironworks Gaming Radio

Ironworks Gaming Forum

Go Back   Ironworks Gaming Forum > Ironworks Gaming Forums > General Discussion > General Conversation Archives (11/2000 - 01/2005)

 
 
Thread Tools Search this Thread
Old 07-11-2004, 10:30 AM   #1
Memnoch
Ironworks Moderator
 

Join Date: February 28, 2001
Location: Boston/Sydney
Posts: 11,771
Costs a bloody fortune here in OZ.

I'm looking at upgrading my memory as I've only got 256MB and about 90% of it is utilised on a regular basis. Unfortunately I'm one of those unlucky suckers with a Dell 8100 mainboard which uses RDRAM which costs a motza here in Sydney. To put things in perspective, a 128MB stick costs about $150 normally - and since I have to install mine in pairs you double that cost - $300 for 256MB.

What I wanted to know was how much do these suckers cost in the US? I'm wondering if it's cheaper to get from the US than from here, where hardly anyone uses them. My specs are:


System Memory Controller
Location : Mainboard
Error Correction Capability : ECC
Number of Memory Slots : 4
Maximum Installable Memory : 2GB
Bank 1 - RIMM_1 : RIMM RAMBUS RDRAM 64MB/18 @ 300Mt/s
Bank 2 - RIMM_2 : RIMM RAMBUS RDRAM 64MB/18 @ 300Mt/s
Bank 3 - RIMM_3 : RIMM RAMBUS RDRAM 64MB/16 @ 300Mt/s
Bank 4 - RIMM_4 : RIMM RAMBUS RDRAM 64MB/16 @ 300Mt/s

Logical/Chipset 1 Memory Banks
Bank 0 : 128MB RDRAM 8/7CL
Bank 1 : 128MB RDRAM 8/7CL
Channels : 2
Speed : 2x 300MHz (600MHz data rate)
Multiplier : 3/1x
Width : 16-bit
Refresh Rate : 1.95µs
Power Save Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 1 : Samsung MR18R 0824AN1-CG6 226A2E01 64MB/4 (144Mx18) ECC RDRAM RIMM PC600-53 (CL2-2 up to 300MHz)
Memory Module 2 : Samsung MR18R 0824AN1-CG6 22132E01 64MB/4 (144Mx18) ECC RDRAM RIMM PC600-53 (CL2-2 up to 300MHz)
Memory Module 3 : Samsung MR16R 0824BN1-CK8 39A3E204 64MB/4 (128Mx16) RDRAM RIMM PC800-45 (CL2-2 up to 411MHz)
Memory Module 4 : Samsung MR16R 0824BN1-CK8 3937E104 64MB/4 (128Mx16) RDRAM RIMM PC800-45 (CL2-2 up to 411MHz)


Can anyone give me a bit more info (even some online stores)? And another question: if my bus speed is 2 x 300mhz for 600mhz, does that mean I can't install PC800 RDRAM?

Thanks for the help - as you can tell I'm on an upgrading frenzy right now.

[ 07-11-2004, 10:32 AM: Message edited by: Memnoch ]
__________________


Memnoch is offline  
Old 07-11-2004, 11:52 AM   #2
Harkoliar
Jack Burton
 

Join Date: March 21, 2001
Location: Philippines, but now Harbor City Sydney
Age: 41
Posts: 5,556
hint: buy a new computer !!
__________________

Catch me if you can..
Harkoliar is offline  
Old 07-11-2004, 12:09 PM   #3
Memnoch
Ironworks Moderator
 

Join Date: February 28, 2001
Location: Boston/Sydney
Posts: 11,771
Well, I found a 2 x 128MB PC800 on eBay going for $100...I put a bid in. We'll see what happens.

Shouldn't you be in bed young man? [img]tongue.gif[/img]
__________________


Memnoch is offline  
Old 07-11-2004, 06:14 PM   #4
Larry_OHF
Ironworks Moderator
 

Join Date: March 1, 2001
Location: Midlands, South Carolina
Age: 48
Posts: 14,759
I paid $65.00/ea. for my cards of 256MB.

I have four each of that size to give me a Gigabyte of memory.


Memory Device Properties:

Form Factor RIMM
Type Detail RAMBUS
Size 256 MB
Speed 400 MHz
Total Width 16-bit
Data Width 16-bit

[ 07-11-2004, 06:17 PM: Message edited by: Larry_OHF ]
__________________
Larry_OHF is offline  
Old 07-11-2004, 06:37 PM   #5
Vaskez
Takhisis Follower
 

Join Date: April 30, 2001
Location: szép Magyarország (well not right now)
Posts: 5,089
Check your computer's manual to see if it can handle 800MHz memory. One thing I do know is that if you have different speeds installed (providing they all work) they will all operate at the speed of the slowest module.
__________________
Too set in his ways to ever relate
If he could set that aside, there'd be heaven to pay
But weathered and aged, time swept him to grave
Love conquers all? Damn, I'd say that area's gray
Vaskez is offline  
Old 07-12-2004, 04:52 AM   #6
Memnoch
Ironworks Moderator
 

Join Date: February 28, 2001
Location: Boston/Sydney
Posts: 11,771
Quote:
Originally posted by Larry_OHF:
I paid $65.00/ea. for my cards of 256MB.

I have four each of that size to give me a Gigabyte of memory.


Memory Device Properties:

Form Factor RIMM
Type Detail RAMBUS
Size 256 MB
Speed 400 MHz
Total Width 16-bit
Data Width 16-bit
Geez that's cheap!!

Costs a fortune here, hence I was thinking of buying from the US and getting it shipped here. But it looks like I've found a bloke who's willing to sell me 2 x 256MB PC1066 for $120. My motherboard will only run it at 600mhz, but the price was too good to refuse.
__________________


Memnoch is offline  
Old 07-12-2004, 08:07 AM   #7
Larry_OHF
Ironworks Moderator
 

Join Date: March 1, 2001
Location: Midlands, South Carolina
Age: 48
Posts: 14,759
Bought mine from a store called "Intrex".
__________________
Larry_OHF is offline  
Old 07-12-2004, 01:52 PM   #8
Ronn_Bman
Zartan
 

Join Date: March 11, 2001
Location: North Carolina USA
Age: 57
Posts: 5,177
Wow, that is cheap!

I bought two 128MG sticks two years ago and payed about $80 each.
__________________
[img]\"http://home.carolina.rr.com/orthanc/pics/Spinning%20Hammer%20Sig%20Pic.gif\" alt=\" - \" />
Ronn_Bman is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The Cost of War GForce General Discussion 1 08-01-2003 10:35 PM
How much would it cost..... Beaumanoir General Conversation Archives (11/2000 - 01/2005) 5 06-18-2003 05:57 PM
War - at Any Cost? pritchke General Discussion 0 03-13-2003 12:37 PM
Cost uberstation Dungeon Craft - RPG Game Maker 1 01-23-2003 09:45 PM
How much does this cost? Sir Goulum Baldurs Gate II: Shadows of Amn & Throne of Bhaal 5 01-12-2003 08:58 PM


All times are GMT -4. The time now is 12:18 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©2024 Ironworks Gaming & ©2024 The Great Escape Studios TM - All Rights Reserved