|
It might just be that you've reached the ceiling for HTT speed on that board. Not all boards can run at 275HTT, it's very much luck of the draw. I've seen an A8N SLI that capped out at 240 HTT! The only board I've seen that doesn't care how high you set the HTT is the DFI-NF4 series.
btw, it might appear to be stable with 230*5 for the bus speed but that might be what was responsible for the data corruption in the first place. Even if it is seemingly stable, the benefit will be absolutely tiny. It doesn't really matter what I set the HTT multiplier to on my board - 2, 3, 4 or 5 all yield the same performance as each other to within a few percent [img]smile.gif[/img] .
|