View Single Post
Old 05-12-2005, 06:32 AM   #6
RoSs_bg2_rox
Zartan
 

Join Date: May 20, 2003
Location: Near Aberdeen, Scotland
Age: 36
Posts: 5,225
Right, in the end I decided to do a complete format, as after reinstalling windows (and keeping my documents etc which were on the other partition) I found that my RAID array was corrupt and I couldn't access it. So I formatted all drives and started again.

Felix - temps are not a problem, I have good cooling and am observing nothing over 38 degrees under full load. I have a PCI Express lock, so that is OK, but I have been upping the voltages to 1.5 (RAM to 3) so that could have been the problem.

I am currently running at just over 2.5ghz, with the following settings.

HTT=5
FSB=230
Ram Voltage-2.8V
CPU Voltage auto

After a few hours of running it is fine, but I haven't stress tested it yet. Also will be testing my hard drives, and my GPU (once I overclock it).

Still not exactly sure what the problem was though, as it shouldn't be anything to do with the RAID array, as the OS was on the Raptor which is standalone, also the RAID array said it was healthy. I think it might have duffed when I reset the CMOS though, so it's not too much of a problem. I didn't lose much, other than a few game saves really. All my documents were recoverable.
__________________
[img]\"http://img.ranchoweb.com/images/ladyzekke/dragonwater2.gif\" alt=\" - \" />
RoSs_bg2_rox is offline   Reply With Quote