Quote:
Originally posted by Stormymystic:
our problem according to an expert does not exsist, so how can we fix it? fyi the problem is unmountable boot drive, and the error codes were all 0's
|
Unmountable Boot Drive errors usually occur because of two possible conditions. Since you state that the error is all 0's, it can only be one.
You are using a hard drive that supports UDMA, which in turn requires an 80pin connector versus the older 40pin. You may have a 40pin connector on your UDMA drive, or you may have a bad cable, or bad connection. Try reseating the IDE cable, or replacing with a known good 80pin.